PSSR Inspections in Leigh
Leigh is a town in the Wigan borough with a strong industrial heritage in textiles and coal mining. Today, it supports manufacturing and logistics businesses, with Leigh Commerce Park and the Parsonage Retail Park area providing employment alongside the nearby Heinz factory at Kitt Green.
About PSSR Inspections in Leigh
Leigh's industrial economy, positioned within the Wigan borough and connected to the wider Greater Manchester conurbation by the A580 East Lancashire Road, supports a substantial number of businesses operating pressurised systems that must comply with the Pressure Systems Safety Regulations 2000. Leigh Commerce Park and the Butts Mill Way Industrial Area host manufacturing, processing, and logistics operations running compressed air systems, steam boilers, and pressurised vessels essential to their production processes. Safe Lee Inspection & Consultancy provides PSSR inspections across Leigh, covering the full range of pressure equipment addressed by the regulations. The town's heritage in textiles and coal mining has given way to modern manufacturing, warehousing, and food production, but the reliance on pressurised systems has not diminished. The nearby Heinz factory at Kitt Green — one of Europe's largest food production sites — exemplifies the food and beverage sector's dependence on steam and compressed air, and similar though smaller-scale operations exist throughout Leigh's industrial areas. Leigh Spinners Mill, the Grade II listed former cotton mill and one of the largest remaining mill buildings in Lancashire, has been partially repurposed for commercial and community use, and premises within converted industrial buildings often contain heating and compressed air systems that need careful PSSR assessment given their age and adaptation history. Engineering workshops, vehicle repair businesses, and fabrication firms across Leigh operate air receivers, compressors, and pneumatic equipment daily. Our engineers examine boilers, calorifiers, air receivers, expansion vessels, safety valves, pressure relief devices, and all associated pipework under written schemes of examination. Safe Lee is based in Irlam, just a short journey from Leigh along the A580, making us one of the closest independent inspection providers for Leigh businesses seeking responsive, competitively priced PSSR compliance support.
Key Areas We Cover
- Leigh Commerce Park
- Butts Mill Way Industrial Area
- Parsonage area
Local Landmarks
Leigh Spinners Mill — Grade II listed former cotton mill, one of the largest remaining mill buildings in Lancashire
Frequently Asked Questions
Do manufacturing businesses on Leigh Commerce Park need statutory inspections?
Yes. Manufacturing businesses on Leigh Commerce Park require statutory inspections based on the equipment they operate. This typically includes LOLER examinations for overhead cranes and forklifts, PSSR inspections for compressed air systems, PUWER assessments for production machinery, and COSHH LEV testing for welding fume or dust extraction systems.
What does a PSSR inspection involve?
A PSSR inspection involves a thorough examination of pressure systems including vessels, pipework, protective devices, and associated fittings. Our competent engineer assesses the physical condition, checks for corrosion, damage or defects, verifies safety devices are functioning correctly, and ensures the written scheme of examination is up to date.
How often is a PSSR inspection required?
The frequency of PSSR inspections is determined by the written scheme of examination, which must be drawn up by a competent person. Typically, protective devices are examined annually and pressure vessels every 2 to 4 years, but this varies depending on the system, its age, and operating conditions.
What equipment does a PSSR inspection cover?
PSSR inspections cover all pressure systems including steam boilers, air receivers, autoclaves, compressed air systems, pressure cookers used in food production, heat exchangers, and any associated pipework and protective devices such as safety valves and pressure gauges.
What happens if a defect is found during a PSSR inspection?
If a defect is found, our engineer will classify it by severity. Critical defects that pose an imminent danger require the equipment to be taken out of service immediately. Other defects will be documented with clear recommendations and timescales for remedial action. A detailed report is issued covering all findings.
Industries Requiring PSSR Inspections in Leigh
We work with businesses of all sizes across a wide range of sectors.
Manufacturing
Leigh Commerce Park and Butts Mill Way support manufacturing businesses using industrial machinery, overhead cranes, and compressed air systems requiring PUWER, LOLER, and PSSR inspections.
Food & Beverage
Leigh's proximity to the Kraft Heinz Kitt Green factory means the area's food supply chain businesses operate pressure vessels, steam systems, and extraction ventilation requiring PSSR and COSHH LEV inspections.
Construction
The guided busway corridor and new-build developments in Leigh generate demand for WAHR inspections of scaffolding, harnesses, and fall arrest systems.
Our PSSR Inspections Process
A straightforward, professional approach from first contact to ongoing compliance.
- 1
Initial Consultation
We discuss your requirements, the equipment involved, and any specific regulatory obligations relevant to your site.
- 2
Site Survey
Our engineer visits your premises to assess the scope of the inspection and identify any immediate concerns.
- 3
Thorough Examination
A detailed, hands-on inspection of all relevant equipment carried out to the applicable statutory standards.
- 4
Report & Recommendations
You receive a comprehensive written report detailing findings, defects, and clear recommendations for remedial action.
- 5
Ongoing Support
We provide follow-up guidance, schedule future inspections, and help you maintain continuous compliance.
Is Your Business Compliant?
Under the Pressure Systems Safety Regulations 2000, employers and duty holders are legally required to ensure equipment is thoroughly examined by a competent person at regular intervals. Failure to comply can result in significant fines, enforcement action, and — most importantly — puts your workforce at serious risk.
Leigh is a town in the Wigan borough with a strong industrial heritage in textiles and coal mining. Today, it supports manufacturing and logistics businesses, with Leigh Commerce Park and the Parsonage Retail Park area providing employment alongside the nearby Heinz factory at Kitt Green.
Pressure Systems Safety Regulations 2000 compliance is not optional
What Our Clients Say
“Lee is a fantastic engineer and very approachable. He delivers examinations with minimal disturbance to your operations in a timely manner. If you need or are unsure if your equipment requires an examination, contact Lee and he will guide you through the process of becoming and staying compliant.”
Lee Stanaway
Reviewed on Google
“Brilliant company! Can't recommend Lee enough. Great communication throughout and speedy reporting to ensure kit is compliant with LOLER and PUWER.”
Thomas Bullivant
Reviewed on Google
“Great service, very knowledgeable regarding my lifting equipment. If you're needing a LOLER examination carried out, get on to Safe Lee!”
Sean Crawford
Reviewed on Google
Need PSSR Inspections in Leigh?
Speak to our experienced engineers today for a free, no-obligation quote.