WAHR Inspections in Stockport, Safe-Lee Inspection & Consultancy

WAHR Inspections in Stockport

Stockport benefits from strong connectivity via the M60 orbital motorway, with Bredbury Park Industrial Estate serving as a key hub for manufacturing and logistics occupiers. The town has a growing digital and tech sector alongside traditional engineering.

About WAHR Inspections in Stockport

From scaffolding on regeneration projects in the town centre to harness inspections for maintenance teams working on rooftop plant above Stockport's commercial buildings, the Work at Height Regulations 2005 touch a wide range of businesses across the borough. The regulations require employers to prevent falls so far as is reasonably practicable, and to inspect the equipment relied on to do it. Safe-Lee Inspection & Consultancy provides WAHR inspections throughout Stockport. The borough's construction activity includes residential developments in Cheadle, Bramhall, and Marple, commercial projects around the Stockport Exchange development, and ongoing maintenance of the town's distinctive Victorian architecture, including premises in the shadow of Stockport Viaduct where scaffold access can be especially complex. Our engineers inspect scaffolding structures for compliance with current TG20 and SG4 standards, assessing base conditions, tie arrangements, board integrity, and access points. Beyond construction, Stockport's warehousing and distribution businesses on Bredbury Industrial Estate and around Cheadle Heath use high-bay racking and mezzanine floors where edge protection and safe access are essential. Facilities management teams maintaining the rooftop plant on Stockport's office buildings and residential towers need properly inspected harnesses, lanyards, anchor points, and guardrail systems. We examine all personal fall protection equipment for wear, damage, and remaining service life, and we verify that anchor points and restraint systems are correctly rated and securely installed. Ladder and stepladder inspections are also part of our WAHR service, these everyday items are involved in a disproportionate number of fall incidents. Stockport employers benefit from Safe-Lee's local knowledge and rapid response times from our Irlam base, with detailed inspection reports that provide clear evidence of compliance for HSE enforcement purposes.

Key Areas We Cover

  • Bredbury Park Industrial Estate
  • Cheadle Royal Business Park
  • Stockport Trading Estate
  • Hazel Grove Industrial Area

Local Landmarks

Bredbury Park Industrial Estate, major industrial hub at Junction 25 of the M60

What Work at Height Regulations 2005 requires of you

Under the Work at Height Regulations 2005, employers and duty holders are legally required to ensure equipment is thoroughly examined by a competent person at regular intervals. Failure to comply can result in significant fines, enforcement action, and, most importantly, puts your workforce at serious risk.

Stockport benefits from strong connectivity via the M60 orbital motorway, with Bredbury Park Industrial Estate serving as a key hub for manufacturing and logistics occupiers. The town has a growing digital and tech sector alongside traditional engineering.

Work at Height Regulations 2005 compliance is not optional

Our WAHR Inspections Process

How we work with WAHR Inspections clients across Stockport: from first contact to ongoing compliance.

  1. 1

    Initial Consultation

    We talk through what equipment you hold, how it is used and which regulations bite on it. That conversation sets the scope, and it is what makes a quote a real figure rather than a guess.

  2. 2

    Site Survey

    An engineer visits to confirm what is actually on site against what was described, and to identify anything needing immediate attention. Sites often hold more equipment than the office records show, and this is where that surfaces.

  3. 3

    Thorough Examination

    The examination itself is hands-on rather than a walk round, carried out to the standard the relevant regulation sets. Each item is assessed on its own and recorded individually, including accessories stored away from the machine.

  4. 4

    Report & Recommendations

    You receive a written report identifying every defect found, classified by how urgently it must be put right, with the date the next examination falls due. Anything dangerous is raised with you on site the same day rather than held back for the paperwork.

  5. 5

    Ongoing Support

    Once the first examination is done we hold the due dates and flag them before they lapse. Most compliance failures are diary failures rather than equipment failures, so that is the part worth automating.

Industries Requiring WAHR Inspections in Stockport

We work with businesses of all sizes across a wide range of sectors.

Manufacturing

Bredbury Park Industrial Estate near Junction 25 of the M60 houses manufacturing businesses using pressure vessels, compressed air systems, and work equipment requiring PSSR, PUWER, and LOLER inspections.

Construction

Stockport's ongoing town centre regeneration and the proposed 500,000 sq ft Bredbury Gateway development generate significant demand for WAHR inspections of scaffolding and fall arrest systems.

Healthcare

Stepping Hill Hospital operates sterilisation equipment, autoclaves, and patient hoists that require regular PSSR and LOLER thorough examinations.

Frequently Asked Questions

What does a WAHR inspection involve?

A WAHR inspection involves examining all work at height equipment for defects, damage, and suitability. This includes checking structural integrity, testing safety mechanisms, verifying correct assembly, and ensuring equipment meets the requirements of the Work at Height Regulations 2005.

How often is a WAHR inspection required?

Work at height equipment must be inspected before each use by the user, and must undergo a formal inspection by a competent person at regular intervals. The frequency depends on the type of equipment and the conditions of use, scaffolding requires inspection at least every 7 days when in use, while other equipment such as harnesses and lanyards typically require formal examination every 6 to 12 months.

What equipment does a WAHR inspection cover?

WAHR inspections cover scaffolding, mobile elevated work platforms (MEWPs), ladders, stepladders, roof ladders, safety harnesses, lanyards, fall arrest systems, guardrails, safety nets, and any other equipment used to prevent or mitigate falls from height.

What Our Clients Say

5.0on Google

Lee is a fantastic engineer and very approachable. He delivers examinations with minimal disturbance to your operations in a timely manner. If you need or are unsure if your equipment requires an examination, contact Lee and he will guide you through the process of becoming and staying compliant.

Lee Stanaway

Reviewed on Google

Brilliant company! Can't recommend Lee enough. Great communication throughout and speedy reporting to ensure kit is compliant with LOLER and PUWER.

Thomas Bullivant

Reviewed on Google

Great service, very knowledgeable regarding my lifting equipment. If you're needing a LOLER examination carried out, get on to Safe Lee!

Sean Crawford

Reviewed on Google

WAHR Inspections in Nearby Areas

We also provide wahr inspections services in these nearby locations.

Need WAHR Inspections in Stockport?

Speak to our experienced engineers today for a free, no-obligation quote.

Call NowGet Quote